Project Opensky 777-300 V2. Model features High resolution textures, Dynamic flexing wings, Body gear steering, Nose gear steering, Rudder lock, Ground spoilers, Low speed aileron locks at high speed, Fully animated control surfaces, Fully independent suspension, Trim Animation, Opening Passenger Doors, Animated tilting bogies, semi-transparent fan textures [carried over form the -200 series], Rolling wheels, Animated thrust reverser's with reverser block doors, Detailed textures, Full night lighting, Crash affects, Ground Service Vehicles And more. Model Designer Hiroshi Igami/Yosuke Ube. Flight Dynamics Designer Brandon D Henry. Tested by Project Open Sky Members. Textures by Ben Jones/Yosuke Ube. Livery by Leigh Ellis

de Havilland Dash 8-100 This is the default AI Dash_8_100 made flyable for FSX. It uses the default CRJ-700 virtual cockpit and 2d panel. Turboprop jet sounds included. By Chris Evans.

North American Rockwell OV-10A Package. This is the beautiful Tim Conrad design OV-10A with a few small tweak so it will run in FSX without problem. This package contains all the update from Mr Conrad and includes the following liveries. USN, USMC, 20th TASS, Moroccan Air Force 1980's, 40 Squadron, Barcelona,Venezuelan Air Force 1973. Panel cfg tweaked for FSX, thumbnails added. Full package with working VC, etc. Tested for FSX, Panel updates and thumbs by Danny Garnier.

Concorde package for FSX. This is the Concorde originally for for FSX/FS2004 by the very talented Mr. Libardo Guzman but with FSX gauges included and easy install for FSX. Mr Guzman is the author. The original package was quite complicated to install for non experienced users. So I have put together this FSX ready package that includes VC with included concorde gauges. Also you can walk down inside the passenger cabin and take a seat once you set autopilot! (use Ctrl/Shift/ with Return and Back buttons - combinations) Enjoy this very special 1st class flight!!! Read the important note inside!

Airbus A300B4-600ST Beluga for FSX. This package contains 1 model and 3 Texture Sets. 2d panel included but no virtual cockpit. Created by Jonathan Reeves, Tom Ruth, Dave Hazelgrove and Emil Serafino Jr.

Boeing 777-300ER Air Canada. Includes VC. Model by Project Opensky.

Boeing 737-7H4 Southwest SI One. Model will work in FSX and FS2004. Model created by Project Opensky.

The LOCKHEED MARTIN F-16 Fighting Falcon (VIPER) by Kirk Olsson adapted to use in FSX by Danny Garnier. This is Kirk Olsson's superb VIPERDEN F-16 with most gauges replaced to it can be used in FSX. Now you have a working Virtual flight deck (VC) and 2d panel. 4 liveries. Please approve gauges when asked. All incompatible gauges replaced with FSX XML gauges. Full package.

Boeing 777-300ER Cathay Pacific Airways. Model will work in FSX and FS2004. Includes VC. Model by Project Opensky. Painted by: Abdullah Rahman

ANTONOV An-26 for FS9/FSX. Known multi-purpose Russian transport, which continues to fly in many countries of the world. This model formed with the purpose to create a full package of this airplane including in-depth VC and capability of activity simultaneously in FS9 and FSX. The special attention I is specially made for the fans of transport aircraft - has given to development in-depth VC and animation. Model, 2D panel, xml-gauges, VC-effects, 4 textures, 3D crew. In-depth manual is included - please read. Original model by V. Zhyhulskiy.

Airbus A340-200 Package. Model with diffuse, bump spec and nightmap in Aerolineas Argentinas livery. Comes with working virtual cockpit (VC) and repainted FSX default 4-engine gauges. Works with SP1 and SP2. Not testet with DX10. By Thomas Ruth

Airbus A330-200 Package. Includes RR, GE and PW engine versions for FSX only. FSX model with diffuse, bump spec and nightmap. Lufthansa, Air France and Air Transat liveries. Comes with working virtual cockpit (VC). Works with SP1 and SP2. Not tested with DX10.

Vought A-7 Corsair II Package. This is the Iris A-7 Corsair released ex payware for FS2004 and modified so it can be use in FSX. All incompatible gauges replaced by FSX XML gauges. Revised 2d panel and virtual cockpit. Thank you to iris for the wonderful model. Modified for FSX by Danny Garnier

The Convair 640 was an American twin-engined medium-range airliner first flown in 1965. The Convair 640 was a turboprop conversion of the Convair-Liner 340 and was powered by two Rolls-Royce Datrt Rda.10 Mk 542-4 turboprops providing a top speed of 482 kmh and a range of 4835 km. Caribair CV-640 update for FSX

Boeing 757-200 British Airways. Model created by Project Opensky. Updated VC and 2d panel. Panel modified for FSX using mainly default Boeing 737-800 Gauges. Panel Updates by Danny Garnier

Boeing 777 -200 PW Lauda OE-LPA. Lauda Air is an airline based in Vienna, Austria. It operates scheduled leisure flights and charters to holiday destinations in Europe, North Africa, the Caribbean and South-East Asia. Its main base is Vienna International Airport [1]. Lauda Air is a member of the Austrian Airlines Group and Star Alliance. Model by Project Opensky Textures by Roman Reiner

Robin DR400 Package adapted for FSX. Original DR400 by Yannick Lavigne. This model was OK in FSX except the panel. I have edited the panel to include all FSX compatible gauges. This is a beautiful airplane to fly VFR in FSX! Includes Robin 135 CDI with TAE-Centurion 1.7 motor. Repaint by Christian Winkel. G-HAIR Regent texture by Patrick Machabert. Panel Updates by Danny Garnier

Boeing 737-900 by Project Opensky updated for FSX with KLM textures. It includes a VC (virtual cockpit) and thumbnail. Works in SP2/Acceleration.

Tornado GR4 Package. This Panavia Tornado GR4 one of the best military releases of all time for FS that I have modified so it can be used in FSX without problems. All inclusive package with upgraded panel to include FSX compatible XML gauges in the VC and 2d panels. This model is very comprehensive and detailed. Ex payware from Iris Simulations. Not supported by Iris Simulations. Freeware Gauges by many. Panel updates by Danny Garnier

Dassault Mirage III E "Chevaliers du Ciel", Version 5 with VC. The Mirage III is the emblematic French Fighter of the sixties. This one is the previous version in which I have just added the VC developed for my Mirage III R + a couple of small improvements. The paint scheme is the one visible as Michel Tanguy's plane in the comics "Cap Zero". The models has full moving parts and animations (control surfaces, gears, spoilers, canopy, pilot ejection, dragchute, rocket cover, pilot ladder, guns + a custom panel + NEW ! a Virtual Cockpit. By Patrice Grange, March 2009.

Project Opensky 777-300 V2 Eva Air. Model features High resolution textures, Dynamic flexing wings, Body gear steering, Nose gear steering, Rudder lock, Ground spoilers, Low speed aileron locks at high speed, Fully animated control surfaces, Fully independent suspension, Trim Animation, Opening Passenger Doors, Animated tilting bogies, semi-transparent fan textures [carried over form the -200 series], Rolling wheels, Animated thrust reverser's with reverser block doors, Detailed textures, Full night lighting, Crash affects, Ground Service Vehicles And more. Model Designer Hiroshi Igami/Yosuke Ube. Flight Dynamics Designer Brandon D Henry. Tested by Project Open Sky Members. Textures by Ben Jones/Yosuke Ube. Livery by

F-22A Raptor Package. This F22 Product comes with a total of eight high quality textures covering some of todays leading U.S. Air Force squadrons, such as the 'Fighting Eagles' at Langley AFB and the 'Black Widows' at Luke AFB. Virtual cockpit included. The F-22 Raptor will become the replacement for the F-15 Eagle air-superiority fighter. It combines a stealth design with highly maneuverable, supersonic (supercruise) speed, with air-to-air and air-to-ground capabilities. Ex Iris Simulations FS2004 payware.. Not supported by or representative of Iris. Tested and thumbs added by Chris 'Flying Eagle' Evans.

Boeing 777-200 Delta Package with FSX compatible VC. Works out of the box! Project Opensky V2. Model features High resolution textures, Dynamic flexing wings, Body gear steering, Nose gear steering, Rudder lock, Ground spoilers, Low speed aileron locks at high speed, Fully animated control surfaces, Fully independent suspension, Trim Animation, Opening Passenger Doors, Animated tilting bogies, Rolling wheels, Animated thrust reverser's with reverser block doors, Detailed textures, Full night lighting, Crash affects, Ground Service Vehicles And more. FDE Service Pack D Compliant, Model Service Pack 2A Compliant, VC Model included, and POSKY Panel mods are pre-installed. Ready to fly immediately after downloading [**99% noob-proof package**]. Delta Airlines "wavey" scheme has been reworked to correct colors and a few flaws. Photoreal windows have been included as well as modified night textures to correct the issues from v1. This scheme depicts Delta's newest 777-200ER--N867DA. Model Designer Hiroshi Igami/Yosuke Ube. Flight Dynamics Designer Warren C. Daniel/Brandon D Henry. Tested by Project Open Sky Members. Textures by Ben Jones/Yosuke Ube. Delta paint by Brandon D. Henry. Panel updated for FSX by Danny Garnier.

This is the US Air Dornier 328-110 by Robert Versluys, D328ah79.zip. It has been revamped for FSX with new sound, paint, panel and .cfg folders. All sounds and gauges are included hence the large size - this is one download where you need to read the readme, especially with regard to your .gau and .cab files. No VC, but the 2D panel has more than enough goodies to make up for this. IFR flight from KJFK to KEWR included [rated as very difficult by my site members!]. Rob Barendregt's pushback gauge, engine smoke and full autopilot for a turboprop makes this a crackling download. Self installer for ease of installation.

Royal Air Force C-130 C3 Package adapted for FSX. This is the Simshed C-130 with all gauges replaced with FSX compatible gauges in both the VC and 2d panel. Now you can fly the best freeware C-130 in your FSX. Panel updates by Danny Garnier. Thank you to Brian Franklin for the beautiful model.